[06/07/12]
PREMO launches a new family of its TP0702 standard, universally adopted by industry. This format provides up to 50mV/Apk-pk/m(for 7.2mH) sensitivity which gives it the best sensitivity in this transponder size.
The new TP0702U and TP0702UCAP is an SMD antenna for low frequency 20kHz-150kHz receiver applications. TP0702UCAP provide an upper and lateral side protection with co-polyamide polyhexamethylene polymer walls, gamma radiated with high thermal stability (supports up to 290 ? C) and mechanical resistance (exceeds 150Mpa if mechanical strength).
This antenna is equipped with NiZn ferrite core with high surface resistivity (> 10Mohm/mm) that provides a highly stable behavior (better than / +/- 3%) over a wide temperature range (-40 ? C to 125 ? C).
The new TP0702UCAP, is particularly suitable for applications such as TPMS (Tire Pressure Monitoring Systems) which requires an excellent performance under extreme conditions, according to AEC-Q200 and additional requirements as EU regulations.
PREMO offers four standard values, 2.38mH, 4.91mH, 7.2mH and 9mH at 125kHz. Others inductance values and frequencies, from 340uH to 18.5mH, upon request.
Its surface mount (SMT) allows an easy use in the automated process of mounting circuit boards, thus eliminating any manual handling.
About PREMO
Premo Group is a world class company designing and manufacturing inductive components. Our wide range of products as RFID transponder coils, EMC filters, PLC accessories, planar transformers, current transducers and chokes cover most demanding applications in the Automotive, Telecom, and Power Electronics
|
